Repair and setup of 3D printers

Repair of 3D printers is best left to professionals, as printers are technically complex devices. We have been engaged in 2014D printing since XNUMX, we own all printing technologies and a huge fleet of our own equipment, and we also have all the spare parts necessary for repairs in stock!

Before contacting a 3D printer repair service, you need to make sure that you are following the instructions when working with a 3D printer. To get started, try to read the materials at the link to make sure of this.

Frequent Faults and Troubleshooting (FDM)

instructions for FDM Photos

Price list for FDM 3D printers Price list for SLA/LCD/DLP 3D printers

We work with both personal and professional machines (3DSystems, SLM Solutions, EOS, Stratasys, etc.). We service all extruder 3D printers (FDM technology).

Here you can order simple and complex diagnostics, flashing electronics, calibration, repair of mechanics and electrics, installation of preventive maintenance, heating table, second extruder, cooling systems and much more.

In addition to repairing 3D printers, we provide services for assembling DIY KIT kits from 5000 rubles. a piece.

To calculate the cost of repairs, send a request to us through any convenient communication channel: name the printer model and a brief description of the problem. Our specialists will contact you as soon as possible.

Price list for troubleshooting common problems in FDM 3D printers

Name of works	open case	closed case
Flashing and tuning electronics	from 850 rubles.	from 950 rubles.
Electrical repair (replacement of wires)	from 1800 rubles.	from 2000 rubles.
Replacing the motherboard	from 1300 rubles.	from 1300 rubles.
Replacing and tuning the motor driver	from 200 rubles.	from 300 rubles.
Replacing / installing a heating table	from 1300 rubles.	from 1700 rubles.
Replacement of stepper motors	from 500 rubles.	from 700 rubles.
Replacement / installation of the display	from 400 rubles.	from 500 rubles.
Replacing the thermal barrier	from 400 rubles.	from 500 rubles.
Nozzle replacement	from 200 rubles.	from 200 rubles.
Thermistor replacement	from 1200 rubles.	from 1200 rubles.
Replacing the heating element	from 1200 rubles.	from 1400 rubles.
Replacing the heating block	from 1300 rubles.	from 1300 rubles.
Replacement / installation of a new extruder	from 2500 rubles.	from 3500 rubles.
Prevention (broaching fasteners, lubrication)	from 500 rubles.	from 700 rubles.
Mechanical repair	from 700 rubles.	from 900 rubles.
Replacing the drive belt	from 450 rubles.	from 650 rubles.
Replacing the guides	from 600 rubles.	from 900 rubles.
Pulley replacement	from 350 rubles.	from 450 rubles.
Assembling DIY kits	from 5000 rubles.	from 8000 rubles.
Upgrades (improvement)	from 5000 rubles.	from 5000 rubles.
Selection of optimal slicer settings for printing + advice on working with a slicer	from 2000 rubles.	from 2000 rubles.
Diagnostics	from 1500 rubles.	from 2500 rubles.
Departure of a specialist in Moscow	from 3000 rubles.	from 3000 rubles.
Departure of a specialist outside Moscow	Individually	Individually

Price list for troubleshooting common problems in SLA/DLP/LCD 3D printers

Name of works	Price
Flashing and tuning electronics	from 2000 rubles.
Electrical repair (replacement of wires)	from 2000 rubles.
Electrical repair (board soldering)	from 4000 rubles.
Replacing the motherboard	from 10000 rubles.
Replacing and tuning the motor driver	from 1800 rubles.
Replacement of stepper motors	from 1800 rubles.
Display replacement	from 1000 rubles.
Replacing the cooler	from 500 rubles.
Limit switch replacement	from 500 rubles.
Replacing UV LEDs	from 15000 rubles.
LCD matrix replacement	from 10000 rubles.
Prevention (cleaning, lubrication)	from 900 rubles.
Replacement of light filter plates	from 7000 rubles.
Projector replacement	from 4000 rubles.
Laser replacement	from 8000 rubles.
Replacing the guides	from 1200 rubles.