3Dprint@studia3d.com.com | sales@studia3d.com

Order 3D metal printing online!

Automatic cost calculation and ordering system.

download 3D model

Materials

1. Aluminum *

2. Titanium

3. Stainless steel *

4. Heat resistant steel

* Available in our automatic settlement system cost.

Aluminum

Available for online order

Calculate the cost

Aluminum AlSi10Mg (ASP-45)

The cost of aluminum 3D printing includes cleaning of the supporting material and sandblasting. Surface roughness - Ra10., Maximum dimensional deviations are within DIN ISO 2768-mK (min. + - 0,3 mm). Additional machining is possible. The wall is not less than 0,9 mm.

Certificate
Features

Stainless steel

Available for online order

CALCULATE THE COST

Stainless steel (316L)

The cost of 3D printing includes cleaning of the support material and sandblasting. Surface roughness - Ra10., maximum dimensional deviations within DIN ISO 2768-mK (min. + - 0,3 mm). Additional machining on a milling machine is possible. Wall not less than 0,9 mm.

Certificate
Features

3D printing technology

Selective laser melting (SLM)

More about SLM

Equipment for metal 3D printing:

Manufacturer SLM Solutions
Material:

metal powder
Technology: SLM
Dimensions of the camera 280x280x365 mm
Laser: 700 W
Layer thickness: 20-75 microns
Print speed: up to 55 cm3/h
Min. element thickness: 150 microns
  • Before submitting a 3D model, the following aspects should be considered:
  1. The model has no errors and satisfies 3D printing requirements.

  2. The size of the item should not exceed 275 * 275 * 330 mm.

  3. Closed cavities for retrieving unused powder are not allowed.

  4. The diameter of one hole in the cavity must be at least 5 mm.

  5. The minimum guaranteed wall thickness of an element is 1 mm (for a smaller thickness, a technologist's consultation is required)

  6. In case of horizontal round holes consideration should be given to machining.

  7. Elements that are 100 times smaller than any other (thin-walled and needle-like elements) are not allowed.

  8. Check optimization of the 3D model to reduce the number of supports.
  9. Check retrievability backing material from the model. 

Netfabb

The best solution for checking 3D models against 3D printing requirements from different materials!

You can download NetFabb on the AutoDesk site. Other software↗

Price

The cost of each part is estimated taking into account the process of cleaning the supporting material and sandblasting. In case of special requirements for the part, it is necessary to consult a specialist Studia3D.

When evaluating the cost of a complex order, a discount will be made on the total amount of work.

Work examples

28.04.2023/0/XNUMX • XNUMX Comments 3D metal printing

Remember the defective metal part? Now we show good 3D metal printing! Which one is without...

Read More
19.04.2023/0/XNUMX • XNUMX Comments Marriage in 3D printing

Metal 3D printing is one of the most complex processes, accompanied by many nuances and technical features. Seal...

Read More
05.04.2023/0/XNUMX • XNUMX Comments 3D metal printing

  Stainless steel parts are simple at first glance, but have a very complex structure inside. ...

Read More
29.03.2023/0/XNUMX • XNUMX Comments Metal 3D printing

3D metal printing on site Studia3D.com! See what miniature and complex parts can be made using...

Read More
Select currency
USD U.S. dollar
RUB Russian ruble