Order 3D printing online
The system of automatic cost estimation and order placement.
3D printing cost estimatefrom 0,125 $/cm³
SBS plastic 3D printing
High flexibility, shock resistance, and frost-resistance (to -80°С), acid, lye, alcohol and fat-resistant. All the materials of this series are certified for contact with food (including hot). The complete lack of smell when printing and in the part. The absolute moisture resistance of materials makes it possible to store them in any convenient place and not to dry them before using a 3D printer. All materials when printed can be exposed to chemical treatment in different solvents to give them glossy finish, transparency, or to improve the structural strength.
ORDER 3D PRINTING FROM YOUR SMARTPHONE!
Get a 5% discount for your order in the app.
We'll make your item in the shortest time possible!
download
SBS plastic characteristics
| Printing temperature | 220-240°C (recommended 230-240°С) |
| Table temperature | 70-90°C (printing without heating using adhesives is possible) |
| Density | 1.01 g/cm3 |
| Moisture absorption | 0.07% |
| Tension modulus | 1350 MPa |
| Flexural modulus | 1450 MPa |
| Breaking strength | 24 MPa |
| Elongation at break | 250% |
| Bending resistance | 36 MPa |
| Shore hardness (HSh) | 68 |
| Rockwell hardness (HRB) | 118 |
| Izod impact (23°C) | 3.5 kJ/m2 |
| Izod impact of a sample with a cut (-30°C) | 2.8 kJ/m2 |
| Izod impact of a sample with a cut (23°C) | 35 J/m |
| Glass transition temperature | -80oC (+95oC) |
| Softening temperature | 76oC |
| Shrinkage when producing parts | 0.2 - 1.2% |
| Transparency | 40% |
| Min. wall thickness | 0.3 mm |
We work in Simplify3D!
The quality of 3D printing mainly depends on the proper building of the code by controlling software. That's why we use the best software!
Know more about Simplify3D »
Parameters of 3D printing with SBS plastic
| Printing temperature | 240-260°C |
| Table temperature | 80-100°C |
| Density | 1.01 g/cm3 |
| Moisture absorption | 0.07% |
| Softening temperature | 85oC |
| Shrinkage when making parts | 0.2 - 1.2% |
| Min. wall thickness | 0.3 mm |
-
SBS plastic figures for Sports Museum in Sochi
know more...
